Amana Tool RC-1045 Insert V-Groove 45 Deg x 7/8 CH x 1/2 Inch SH Power Hand Tools

Amana Tool RC-1045 Insert V-Groove 45 Deg x 7/8 CH x 1/2 Inch SH

$48

Amana Tool RC-1045 Insert V-Groove 45 Deg x 7/8 CH x 1/2 Inch SH

Very disappointed for the amount of money spent. Ridiculously out of specification.The cutter head tip will not center to the body. It was out by 0.0225" upon delivery. Which makes for a cut that is 0.045" wider than intended and a 0.045" flat at the bottom of the cut. The best I could do by removing and reinstalling the blade is 0.015 off center.To top it all off, the tip of the bit snapped off while cutting mdf 0.0313" deep at 180"/minute.I have gotten much better results with tooling around the $40 mark. Granted it is not insert tooling, but I am willing to spend the extra cash to replace the entire bit once it is worn if it means that the cutter is at least centered.

Amana Tool RC-1045 Insert V-Groove 45 Deg x 7/8 CH x 1/2 Inch SH

This fits your .

Make sure this fits by entering your model number.
Replaceable carbide knives to extend tool cutting life. Just replace the knives when dull or turn to sharper edge if applicable. Replaceable knives are as much as 4 times longer lasting than carbide tipped equivalent..
1/2 Inch Shank
Advantages of Insert Tooling: Long lasting insert knives provide superior smooth quality cuts every time Quick and precise replacements of dull knives Due to insert accuracy tool life is extended Insert tooling allows for harder grades of carbide Special carbide grades for special applications Knives can be re-sharpened multiple times without affecting the original profile Cost effective solution compared to replacing brazed router bits
SPECIFICATIONS: (D) Diameter: 13/16 (a) Angle: 45 (B) Cutting Height: 7/8 (d) Shank: 1/2 Overall Length (L): 2-3/8 a1: 22.5 B1: 1-1/16 Cutting Edges: 1 Max RPM: 24,000 L1: 1-3/8 Flutes: 1 # of knives: 1

|||

Product description

Industrial Quality Signmaking, Lettering, V Groove Miter Fold are made by Amana Tool, the leading manufacturers of high-quality wood-cutting tools. Amana Tool RC-1045 Insert V-Groove 45 Deg x 7/8 CH x 1/2 Inch SHK CNC Router Bit has innovative CNC tool design with a high grade solid carbide insert knife which allows you to get two uses out of each insert. Once insert knife show signs of wear you can rotate the insert for a brand new cutting edge. The secure locking screw system ensures maximum safety and maintains cutting accuracy. CNC router requires quality hold downs to ensure the least possibility of material shifting during operation. Excellent for: Aluminum, Brass, Bronze, Copper, Gold, Silver amp; Carbon Fiber (Engraving Only), Acrylic, Foam, High-Density Polyethylene (HDPE), King ColorCore The Multi-Color Engravable Polymer Sheet, Laminate, Melamine, MDF/HDF, Plastic, Sign Board, Solid Surface, Veneered Plywood, Wood, Xanita Board, 20lbs High Density Urethane. SPECIFICATIONS: (D) Diameter: 13/16; (a) Angle: 45; (B) Cutting Height: 7/8; (d) Shank: 1/2; Overall Length (L): 2-3/8; a1: 22.5; B1: 1-1/16; Cutting Edges: 1; Max RPM: 24,000; L1: 1-3/8; Flutes: 1; # of knives: 1.

From the manufacturer

RC-1045 CNC Insert V-Groove 45 Deg x 7/8 x 1/2 Inch Shank

The innovative CNC tool design uses the highest grade carbide insert knife. These industrial V-Groove insert router bits were especially designed for applications including:

- Miter folds - "create the perfect joint"

- Signmaking and lettering

Advantages of Insert Tooling:

- Long lasting insert knives provide superior smooth quality cuts every time

- Quick and precise replacements of dull knives

- Due to insert accuracy tool life is extended

- Insert tooling allows for harder grades of carbide

- Special carbide grades for special applications

- Knives can be re-sharpened multiple times without affecting the original profile

- Cost effective solution compared to replacing brazed router bits


Excellent for: - Aluminum, Brass, Bronze, Copper, Gold, Silver amp; Carbon Fiber (Engraving Only) - Composites - High Density Polyethylene (HDPE) - Laminate - Melamine - MDF/HDF - PVC - Sign Board - Solid Surface - Wood	CNC Router Bits Amana Tool offers a full range of top-quality precision CNC tooling for industrial applications, including CNC router tooling, insert tooling, spiral tooling, diamond tooling and tool holders. Amana Tool router bits for CNC machines provide superior smooth quality cuts everytime. Each CNC insert router bit body was designed for quick, precise replacements of dull knives. Replacement knives are secured with locking screws for maximum safety during CNC tooling. CNC Insert knives are long lasting and can be re-sharpened multiple times without affecting the original profile.	About Amana Tool For over 40 years Amana Tool is specializing in industrial quality solid carbide, insert carbide and carbide-tipped cutting tools for the woodworking, plastics, aluminum, composite and metal industry. We provide many solutions for manufacturers, fabricators, display and cabinet professionals as well as hobbyists. Amana Toolâs full line of industrial-quality cutting tools includes saw blades, router bits, shaper cutters, boring bits and much more.

Amana Tool RC-1045 Insert V-Groove 45 Deg x 7/8 CH x 1/2 Inch SH

Amana Tool RC-1045 Insert V-Groove 45 Deg x 7/8 CH x 1/2 Inch SH