Select your location
Bosch Rexroth around the world
Asia & Pacific
Europe
WE MOVE. YOU WIN.
$60
Select your location
Bosch Rexroth around the world
Asia & Pacific
Europe
Spliced rails with pre-drilled long holes--Easy installation.
Full set rail spacer amp; screws--Fit wooden amp; concrete wall.
Pure carbon steel hanger rollers--Sliding noiseless.
Door stoppers--Quiet close with nylon cap and spring wing.
Floor guide--Stabilize the bottom to keep it from swinging.
Anti-jump disk block--Prevent the door from falling down.
Q: How much space do I need above the doorway?
A: 6" clearance is needed from the top of the door to the ceiling (or crown molding) for CCJH sliding barn door hardware kit to fit accurately.
Q: What is the clearance from door panel to the wallï¼
A: The clearance between door panel and wall is about 5/8".
Q: How to do if there is a door trim?
A: You should put a header board that is as thick as the door trim and install the rail to the header board.
|
|
|
|
|
|
|---|---|---|---|---|---|
| J Shaped | Y Shaped | Diamond Style | Anchor Shaped | Big Wheel Style | |
| Brand: | CCJH | CCJH | CCJH | CCJH | CCJH |
| Compatibility: | Single Door | Single Door | Single Door | Single Door | Single Door |
| Loading Capacity: | 220lbs per door | 220lbs per door | 220lbs per door | 220lbs per door | 220lbs per door |
| Fit Door Panel Thickness: | 1 1/4"-1 7/8" | 1 1/4"-1 7/8" | 1 1/4"-1 7/8" | 1 1/4"-1 7/8" | 1 1/4"-1 7/8" |
| Min Space Above Door: | 6'' | 5'' | 6'' | 6'' | 9'' |